How To Mount A Whirlpool Washing Machine Using A Drawer

Disconnecting the Washer

Disconnect the power for the washing machine.

Disconnect the water lines using channel lock pliers.

Disconnect the drain hose and empty it into a bucket.

Pull the washing machine away from the wall.

Spread the blanket out on the floor behind the washer. Tilt the washer back till it is laying, back down, on the blanket. You will will need assistance for this.

Mounting the Pedestal

Unscrew the feet from Clear Away Washing Machine Smells the bottom in the washer with channel lock pliers.

Remove the pedestal drawer from the box and open it. Take away the screws attaching the drawer to the rails with a Phillips screwdriver. There are two screws, a single on either side. Remove the drawer and set it aside. Push Washing Machine Repair the drawer sliders back into place. Put the screws in a cup or other container so you don't misplace them.

Install two of the 5/8-inch hex screws that came together with the pedestal in to the holes on the back edge from the bottom in the washer. Use a 5/8-inch wrench to turn the screws till they are sticking out from the bottom with the washer about 3/8 of an inch.

Turn the pedestal frame up and lay it flat on its backHow to Mount a Whirlpool Washing Machine With a Drawer. Align the top with the frame with all the bottom of the washer and insert the screws heads you installed in Step 3 into the keyhole slots on the best in the pedestal frame. Raise the frame up to seat the hex screws.

Screw the two remaining 5/8-inch hex screws up by way of the holes on the prime front with the pedestal frame and in to the base in the washer frame. Use a 5/8-inch wrench to tighten all the hex screws.

Lift the washer and reconnect the drain hose and water lines. Slide the washer back into place. Ensure the pedestal feet are making contact with the floor. Use channel lock pliers to loosen the foot lock nut and turn the foot shaft to make adjustments.

Reassemble the pedestal drawer using the screws you removed earlier. Slide the drawer into placeHow to Mount a Whirlpool Washing Machine With a Drawer.